We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 different branches. For far more specifics: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
| Model | SGPM-90II | ||||
| Capacity/Strain(m3/min,/BAR) | twenty.8/.7 | 19.8/.8 | 16.9/1. | fourteen.3/1.three | |
| Motor | Power(KW) | 90 | |||
| Velocity(r/min) | 2980 | ||||
| Volt(V) | 380 | ||||
| Motor safety grade | IP54 | ||||
| Electrical Supply | 380V/50Hz/3Phase(customizable) | ||||
| Lubricating oil quantity(L) | 102 | ||||
| Outlet Temperature(ºC) | ≤ ambient Temperature+15ºC | ||||
| Driven way | Direct Driven | ||||
| Noise level at 1 meter | 72±3dB(A) | ||||
| Cooled method | Air /Water cooling | ||||
| Oil content | <3ppm | ||||
| Outlet Connection | DN80 | ||||
| Dimension | Length(mm) | 3150 | |||
| Width(mm) | 1980 | ||||
| Peak(mm) | 2150 | ||||
| Fat(kg) | 4100 | ||||
Introduction of double phase screw air compressor
Double phase screw air compressor in the major components with double screw,the compression procedure by the fir EPT phase screw and 2nd screw by way of grading sequence compression.
Double screw air compressor in addition to uphold twin-screw compressor has the positive aspects of basic framework,versatile installation and higher effectiveness,but also highlights the benefits of their possess efficient,power-preserving:
one.can minimize the bearing load,increase quantity performance,
two.in the case of some load procedure,can enhance efficlency,power conserving.
Double screw air compressor than twin-screw compressor strength preserving up to fifteen%,each operate for 8000 several hours a yr, Annual savings of about two hundred thousand yuan electric power.
Gain of two phase screw air compressor
1. Hierarchical compression to save compression perform
By means of the two-phase collection procedure, the authentic single-stage compression process is divided into two compression processes. Such a process placing can decrease the ratio of every one-stage compression procedure, which can efficiently minimize the compression and compression of each and every stage screw. Required travel electrical power.
In the process of perfect gas compression, the sum of the power required for single-stage strain transmission and the power necessary for multi-stage compression is equal, but in the real compression approach, because of to a collection of factors these kinds of as the transmission energy decline of the coupling, the friction coefficient of the bearing and the viscosity of the coolant With the enhance of the applied power, the useless electrical power exceeding the identical ratio is produced, so the worthless energy in the actual compression process can be lowered by decreasing the compression ratio of each stage, so that the sum of the electrical power required for multi-stage compression is less than that of solitary-stage compression Needed electrical power.
2. The intermediate heat oil coo EPT and decreases the temperature of the gas entering the next phase. All the gas compression process is truly the method of the friction among the gas and the relocating elements and becoming compressed by it.
In the presence of friction, the gasoline will rise in temperature due to friction, and there will inevitably be a development of shadow accounts. This part of vitality will be released in the form of power in the fastened volume of air compression by escalating its very own strain.
The temperature increase of the fuel increases the pressure of the fuel alone during the compression procedure and increases the compression ratio. Consequently, it is required to pay out extra electrical power to drive the products to shrink the air to the sought after pressure worth. As a result, the two-phase screw compressor is supplied with a coolant injection curtain unit.
Q1: What is the rotor pace for the air end?
A1: 2980rmp.
Q2: What’s your lead time?
A2: usually, 5-7 days. ( EPT orders: 15days)
Q3: Can you offer water cooled air compressor?
A3: Yes, we can (normally, air cooled kind).
This fall: What’s the payment term?
A4: T/T, L/C, Western Union, etc. Also we could accept USD, RMB, and other currency.
Q5: Do you accept customized voltage?
A5: Yes. 380V/50Hz/3ph, 380V/60Hz/3ph, 220V/50Hz/3ph, 220V/60Hz/3ph, 440V/50Hz/3ph, 440V/60Hz/3ph, or as per your requests.
Q6: What is your warranty for air compressor?
A6: One year for the entire air compressor(not which includes the consumption spare components) and technical supports can be supplied according to your needs.
Q7: Can you accept EPT orders?
A7: Of course, EPT orders are warmly welcome.
Q8: How about your customer service and after-sales service?
A8: 24hrs on-line support, 48hrs problem solved promise.
Q9: Do you have spare parts in stock?
A9: Yes, we do.
Q10: What kind of initial lubrication oil you used in air compressor?
A10: TOTAL 46# mineral oil.
If you have any inquiries, remember to do not hesitate to speak to us. Many thanks!
We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 different branches. For a lot more specifics: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of original products manufacturer’s (OEM) part quantities or logos , e.g. CASE® and John Deere® are for reference reasons only and for indicating solution use and compatibility. Our business and the shown substitute areas contained herein are not sponsored, accepted, or created by the OEM.
